TOMMYGEL 2.5KG by Letco Medical Safety Data Sheet Section 1: Identification Common Name/Trade Name TOMMYGEL Supplier Information Letco Medical, LLC 1316 Commerce Drive NW Decatur, AL 35601 1 (800) 239-5288 +1 (734) 843-4693 IN CASE OF EMERGENCY: Chemtrec 1 (800) 424-9300 (24 hours) Product Synonym(s) N/A Relevant Use(s) of Product Manuf acture or Compounding of Substances Section 2: Hazards Identification Classification of Substance or Mixture Not classif ied. Signal Word None Hazard Statement(s) N/A Pictogram(s) N/A Precautionary Statement(s) N/A Hazards Not Otherwise Classified No data available Ingredient(s) with Unknown Toxicity No data available Section 3: Composition/Information on Ingredients Chemical Name HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER & SQUALANE & POLYSORBATE 60 Common Name Tommygel CAS Number N/A Impurities and/or Stabilizing Additives No data available Section 4: First Aid Measures General Advice Notes to physician: In case of inhalation of decomposition products in a f ire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance f or 48 hours. If Inhaled Remove victim to fresh air and keep at rest in a position comf ortable f or breathing. Get medical attention if symptoms occur. In case of inhalation of decomposition products in a f ire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance f or 48 hours. In Case of Skin Contact Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. In Case of Eye Contact Immediately f lush eyes with plenty of water, occasionally lif ting the upper and lower eyelids. Check f or and remove any contact lenses. Get medical attention if irritation occurs. If Swallowed Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comf ortable f or breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. Most Important Symptoms and Effects Eye contact: No known signif icant ef f ects or critical hazards. Inhalation: Exposure to decomposition products may cause a health hazard. Serious ef f ects may be delayed f ollowing exposure. Skin contact: No known signif icant ef f ects or critical hazards. Ingestion: No known signif icant ef f ects or critical hazards. Section 5: Fire Fighting Measures Suitable Extinguishing Media Use an extinguishing agent suitable f or the surrounding f ire. Special Hazards Arising From the Substance/Mixture In a f ire or if heated, a pressure increase will occur and the container may burst. Special PPE and/or Precautions for Firefighters Fire-f ighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a f ull f ace-piece operated in positive pressure mode. Page 1 of 4 Section 6: Accidental Release Measures Personal Precautions, Protective Equipment and Emergency Procedures Put on appropriate personal protective equipment. Methods and Materials Used for Containment Small spill: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Large spill: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or conf ined areas. Wash spillages into an ef f luent treatment plant or proceed as f ollows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container f or disposal according to local regulations. Dispose of via a licensed waste disposal contractor. Cleanup Procedures Small spill: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Large spill: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or conf ined areas. Wash spillages into an ef f luent treatment plant or proceed as f ollows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container f or disposal according to local regulations. Dispose of via a licensed waste disposal contractor. Section 7: Handling and Storage Precautions for Safe Handling Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and f ace bef ore eating, drinking, and smoking. Remove contaminated clothing and protective equipment bef ore entering eating areas. Stir bef ore use. Conditions for Safe Storage Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and f ood and drink. Keep container tightly closed and sealed until ready f or use. Containers that have been opened must be caref ully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Store away from light and heat (0-30°C) Section 8: Exposure Controls/Personal Protection Components with Workplace Control Parameters No data available Appropriate Engineering Controls Good general ventilation should be suf f icient to control worker exposure to airborne contaminants. Wash hands, f orearms and f ace thoroghly af ter handling chemical products, bef ore eating, smoking, and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing bef ore reusing. Ensure that eyewash stations and saf ety showers are close to the workstation location. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, f ume scrubbers, f ilters or engineering modif ications to the process equipment will be necessary to reduce emissions to acceptable levels. PPE - Eye/Face Protection Saf ety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the f ollowing protection should be worn, unless the assessment indicates a higher degree of protection: saf ety glasses with side-shields. PPE - Skin Protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Recommended: f luor rubber, nitrile rubber. Appropriate f ootwear and any additional skin protection measures should be selected based on the task being perf ormed and the risks involved and should be approved by a specialist bef ore handling this product. PPE - Body Protection Personal protective equipment f or the body should be selected based on the task being perf ormed and the risks involved and should be approved by a specialist bef ore handling this product. PPE - Respiratory Protection Use a properly f itted, air-purif ying or air-f ed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the saf e working limits of the selected respirator. Page 2 of 4 Section 9: Physical and Chemical Properties Appearance Physical state: Liquid. (Viscous liquid). Color: Translucent, Opaque, Whitish, Yellow tint. Upper/Lower Flammability or Explosive Limits No data available Odor Characteristic Vapor Pressure No data available Odor Threshold No data available Vapor Density No data available pH 4,5 to 6,5 (Conc. (% w/w): 3%) Relative Density 1,1 g/cm� to 25�C Melting Point/Freezing Point 5�C (41�F) Solubility Dispersible in the f ollowing materials: cold water. Initial Boiling Point and Boiling Range 100�C (212�F) Flash Point Closed cup: >100�C (>212�F) Evaporation Rate No data available Flammability (Solid, Gas) None available. Partition Coefficient No data available Auto-Ignition Temperature No data available Decomposition Temperature No data available Viscosity Dynamic: 1000 to 5000 mPa�s (1000 to 5000 cP). Temperature of viscosity measurement: 25�C. Section 10: Stability and Reactivity Reactivity No data available Chemical Stability The product is stable. Possibility of Hazardous Reactions Under normal conditions of storage and use, hazardous reactions will not occur. Conditions to Avoid No data available. Incompatible Materials No data available. Hazardous Decomposition Products Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11: Toxicological Information Acute Toxicity - LD50 Oral Not classif ied as dangerous. Acute Toxicity - Inhalation No data available Acute Toxicity - Dermal No data available Acute Toxicity - Eye No data available Skin Corrosion/Irritation Non-irritating to the skin. Serious Eye Damage/Irritation Non-irritating to the eyes. Respiratory or Skin Sensitazation No data available Germ Cell Mutagenicity No data available Carcinogenicity IARC No data available Carcinogenicity ACGIH No data available Carcinogenicity NTP No data available Carcinogenicity OSHA No data available Reproductive Toxicity No data available Specific Target Organ Toxicity - Single Exposure No data available Specific Target Organ Toxicity - Repeated Exposure No data available Aspiration Hazard No data available Page 3 of 4 Section 12: Ecological Information Toxicity Result: Acute LC50 > 100 mg/l. Test: Literature. Species: Fish. Exposure: 96 hours. Persistence and Degradability Test: OCDE 301F. Result: 13% - Not readily -28 days. Conclusion/Summary: Not readily biodegradable. This product shows a low bioaccumulation potential. (Literature) The polymeric component of the product is heavily removable. Bio-accumulative Potential No data available Mobility in Soil No data available Other Adverse Effects No known signif icant ef f ects or critical hazards. Section 13: Disposal Considerations Waste Treatment Methods Product The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recylcable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless f ully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landf ill should only be considered when recycling is not f easible. This material and its container must be disposed of in a saf e way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runof f and contact with soil, waterways, drains, and sewers. Waste Treatment Methods Packaging The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recylcable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless f ully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landf ill should only be considered when recycling is not f easible. This material and its container must be disposed of in a saf e way. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runof f and contact with soil, waterways, drains, and sewers. Special Precautions Landfill or Incinerations No data available Other Information No data available Section 14: Transport Information UN Number Not dangerous goods. UN Proper Shipping Name N/A Transport Hazard Class(es) N/A Packaging Group N/A Environmental Hazards N/A Section 15: Regulatory Information Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs): Not listed. Clean Air Act Section 602 Class I Substances: Not listed. Clean Air Act Section 602 Class II Substances: Not listed. DEA List I Chemicals (Precursor Chemicals): Not listed. DEA List II Chemicals (Essential Chemicals): Not listed. SARA 302/304 Composition/inf ormation on ingredients: No products were f ound. SARA 304 RQ: Not applicable. SARA 311/312 Classif ication: Not applicable. Composition/inf ormation on ingredients: No products were f ound. Section 16: Other Information Additional Information Prepared By Lisa Russell Revision Date 01/07/2019 17:15 Disclaimer Letco Medical, LLC believes that the above information is correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. If the product is used as a component in another product, this information may not be applicable. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED ABOVE. Letco Medical shall not be held liable for any loss or damage resulting from handling, storage, use or from contact with the above product. Page 4 of 4
