POLYMYXIN B SULFATE, USP (MICRONIZED) 50MU by Letco Medical
Safety Data SheetSection 1: IdentificationCommon Name/T rade NamePOLYMYXIN B SULFATE USPSupplier InformationLetco Medical, LLC1316 Commerce Drive NWDecatur, AL 356011 (800) 239-5288+1 (734) 843-4693IN CASE OF EMERGENCY:Chemtrec1 (800) 424-9300 (24 hours)Product Synonym(s)Polymyxin Bsulfate saltRelevant Use(s) of ProductManufacture or Compounding of SubstancesSection 2: Hazards IdentificationClassification of Substanceor MixtureAcute toxicity, Oral (Category 4)Signal WordWarningHazard Statement(s)H302Harmful if swallowedPictogram(s)Precautionary Statement(s)P264Wash hands thoroughly after handling.P270Do not eat, drink or smoke when using this product.P301+P312IF SWALLOWED Call a POISON CENTER or doctor/physician if you feel unwell.P330Rinse mouth.P501Dispose of contents/container to an approved waste disposal plant.Hazards Not OtherwiseClassifiedNo data availableIngredient(s) with UnknownT oxicityNo data availableSection 3: Composition/Information on IngredientsChemical NamePolymyxin B sulfate saltCommon NamePolymyxin B sulfateCAS Number1405-20-5Impurities and/or StabilizingAdditivesNo data availableSection 4: First Aid MeasuresGeneral AdviceConsult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.If InhaledIf breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.In Case of Skin ContactWash off with soap and plenty of water. Consult a physician.In Case of Eye ContactFlush eyes with water as a precaution.If SwallowedNever give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.Most Important Symptomsand EffectsThe most important known symptoms and effects are described in the labeling (see section 2.2) and/or section 11.Section 5: Fire Fighting MeasuresSuitable ExtinguishingMediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Special Hazards ArisingFrom theSubstance/MixtureCarbon oxides, nitrogen oxides (NOx), Sulphur oxidesSpecial PPE and/orPrecautions for FirefightersWear self contained breathing apparatus for fire fighting if necessary.Page 1 of 4
Section 6: Accidental Release MeasuresPersonal Precautions,Protective Equipment andEmergency ProceduresUse personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequateventilation. Avoid breathing dust.Methods and MaterialsUsed for ContainmentPick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers fordisposal.Cleanup ProceduresPick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers fordisposal. Do not let product enter drains.Section 7: Handling and StoragePrecautions for SafeHandlingAvoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation atplaces where dust is formed.Conditions for Safe StorageKeep container tightly closed in a dry and well-ventilated place. Keep in a dry place.Section 8: Exposure Controls/Personal ProtectionComponents withWorkplace ControlParametersContains no substance with occupational exposure limit values.Appropriate EngineeringControlsHandle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end ofworkday.PPE - Eye/Face ProtectionSafety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved underappropriate government standards such as NIOSH (US) or EN 166 (EU).PPE - Skin ProtectionHandle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touchingglove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordancewith applicable laws and good laboratory practices. Wash and dry hands.PPE - Body ProtectionComplete suit protecting against chemicals. The type of protective equipment must be selected according to theconcentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must beinspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skincontact with this product. Dipose of contaminated gloves after use in accordance with applicable laws and goodlaboratory practices. Wash and dry hands.PPE - RespiratoryProtectionFor nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection usetype OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested andapproved under appropriate government standards such as NIOSH (US) or CEN (EU).Section 9: Physical and Chemical PropertiesAppearanceForm: Powder Colour: No data availableUpper/Lower Flammabilityor Explosive LimitsNo data availableOdorNo data availableVapor PressureNo data availableOdor T hresholdNo data availableVapor DensityNo data availablepHNo data availableRelative DensityNo data availableMelting Point/FreezingPointNo data availableSolubilityNo data availableInitial Boiling Point andBoiling RangeNo data availableFlash PointNo data availableEvaporation RateNo data availableFlammability (Solid, Gas)No data availablePartition CoefficientNo data availableAuto-Ignition T emperatureNo data availableDecompositionT emperatureNo data availableViscosityNo data availablePage 2 of 4
